Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Shimano Di2 Battery Charger Cable
$14.99
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.
Shimano 9-Speed Chain Pins
$17.49
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
Shimano 10-Speed Chain Pins
$18.99
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
Shimano Dura-Ace R9150 Di2 Front Derailleur Braze-on Adaptor
$22.99 - $23.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Shimano Di2 E-Tube Wire
$36.99 - $134.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Shimano Ultegra 6800 11-Speed Rear Derailleur Pulley Set
$41.49
Shimano Rear Derailleur Pulley Assemblies
Shimano Dura-Ace R9100 Rear Derailleur Pulley Set
$53.99
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for Dura-Ace R9100 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
Shimano BT-R1A External Di2 Battery
$109.99
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano Di2 Battery Charger
$139.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
SRAM Power Link Chain Connector
$6.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$6.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM Flat Mount Disc Caliper Bracket Bolts
$9.00
Flat Mount Disc Caliper Bracket Bolts
SRAM Brake Pad Spreader Springs
$10.00
Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes
SRAM NX/SX Eagle Rear Derailleur Pulley Kit
$29.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit
SRAM IS Disc Brake Adaptor
$32.00
Disc Brake Adaptors - Includes Stainless Bolts
SRAM Flat Mount Disc Brake Adaptor
$33.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
SRAM Frame Plug Tacklebox Refill Pack
$40.00
For filling and sealing off unused holes in your bicycle frame.
SRAM Guide R/RE/DB5/Code R Lever Internals
$41.00
- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1
SRAM GX Eagle Rear Derailleur Pulley Kit
$46.00
GX Eagle Rear Derailleur Pulley Kit
SRAM Braze-on Front Derailleur Clamp with ChainSpotter Stop
$52.00
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
SRAM Wide Spacing Derailleur Braze-on Adaptor
$52.00
Useful on some bikes with 135mm rear dropout spacing that have cranks with longer spindles.
SRAM RED eTap Brake Hood Covers
$55.00
Ergonomic design for comfort in a variety of hand positions. -Compatible with SRAM eTap Shifting/Brake Levers
SRAM Stealthamajig Hydraulic Disc Brake Hose Fitting Kit
$57.00
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
SRAM Guide RSC/Ultimate/Code RSC Lever Internals
$58.00
- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1
SRAM Level Ultimate/Tlm/Tl Lever Internals
$58.00
- Lever Internals Gen 2 Level Ultimate/TLM/TL Qty 1
SRAM Guide Ultimate Hose Kit
$67.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
SRAM Titanium Rotor Bolts
$74.00
- Titanium rotor bolts - T25 bolt head
SRAM Guide R Gen 2
$106.00
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R
SRAM Guide RS Gen 2
$122.00
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS
SRAM Guide RSC Gen 2
$153.00
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC
RockShox Reverb Hose Barb Remote
$12.00
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
RockShox Reverb Hose Barb Post
$15.00
RockShox Reverb Hose Parts
RockShox Dust Seal and Oil Seal Kit for Argyle, Boxxer, Pike, Reba, Recon, Revelation, Tora
$44.00
- 28mm for Dart, Judy, J2, J3, Pilot,Sid (pre-2008) - 32mm for Argyle, Boxxer (pre-2009), Pike, Reba, Recon, Revelation, Tora - 35mm for Domain, Lyrik - 40mm for Totem
RockShox Maxle Stealth Rear Thru-Axle
$47.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
RockShox DebonAir C1 Air Spring Upgrade Kit - Lyrik/Yari A1+
$63.00
- Air Spring Upgrade Kit—DebonAir C1 - Includes DebonAir Assembly, seal head - LYRIK/YARI A1+ (2016+)
RockShox DebonAir C1 Air Spring Upgrade Kit - Pike B1+/Revelation A1+
$63.00
- Air Spring Upgrade Kit—DebonAir C1 - Includes DebonAir C1 Assembly, seal head - PIKE B1+/Revelation A1+ (2018+)
RockShox Maxle Stealth Front Thru-Axle
$63.00
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
RockShox Reverb Stealth Main Piston and Poppet Kit
$76.00
Main Piston and Poppet kit for A2 generation internally routed RockShox Reverb Stealth seatposts. - For "A2" designated posts, 2013-2016: Will not work for A1 posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.
RockShox Maxle Lite Through-Axle
$82.00 - $94.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
RockShox Maxle Ultimate Rear Thru-Axle
$96.99
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
RockShox OneLoc Remote
$121.00
The new OneLoc remote provides total control over your RockShox fork at your fingertips. The increased leverage at the bar translates in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes and RockShox's Reverb remote.
RockShox Remote Upgrade Kit for Reverb
$146.00
This 1X-style remote for installation on the left side provides improved dropper actuation for your Reverb seatpost. Includes: - Remote - Bleeding edge fitting - Discrete clamp - MMX clamp
RockShox Reverb Vice Blocks
$161.00
7.5mm, 10mm, 25-35mm (used for Reverb service) - Reverb AXS/Reverb A1-B1/Reverb Stealth A2-C1
RockShox Reverb Remote Lever Assembly A1
$186.00
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth. - Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
No Image
$189.00
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth. - Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
RockShox XLoc Full Sprint Remote
$239.00
This hydraulic lockout offers completely sealed and dependable fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
RockShox Charger Race Day Damper Upgrade Kit
$371.00
- Damper Upgrade Kit—CHARGER RACE DAY Crown (Includes Complete Right Side Internals) - 32mm 100mm Max Travel - Reba A7 80-100mm (2018+)/SID 100 A1 (2017+)
Profile Design UCM Universal Computer Mount 25mm
$17.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM XL Universal Computer Mount 60mm
$17.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM Aerobridge
$34.99
Profile Design's UCM Aerobridge positions your computer between your aero extensions to give you an additional accessory mount. It features adjustable width so you can be sure of a great fit.
Problem Solvers Seatpost Shim
$12.99 - $13.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Kind Shock Southpaw
$79.99
- 1x Systems compatible - Multi-axis adjustable body with split clamp - Easy to install
KMC MissingLink 6-8-Speed IG 7.1mm
$3.99
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
KMC MissingLink 6-8-Speed 7.3mm
$7.99
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
KMC MissingLink 9-Speed
$9.99
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
KMC MissingLink CL559R Connector
$10.99
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
K-Edge Road Braze-on Chain Catcher
$34.99
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains. - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge Pro Road Braze-on Chain Catcher
$44.99
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
K-Edge K-EDGE 1x Mountain Chain Guide
$134.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions. - Full-cage design for chain retention under the most abusive cross situations - Braze-on mount and braze-on adapter clamp compatible - Fully adjustable for height, center-line, and angle - Optimized for 10 and 11spd drivetrains - CNC Machined from 6061-T6 Aluminum (no plastic parts) - Stainless Steel Hardware - Weight: 60.8 grams (excluding braze-on adapter clamp) - Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included - Optimized for 34T to 44T Chain Rings - “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Jagwire End Cap Combo Kit
$83.99
End cap packs provide a little extra style to your housing end caps and cable tips.